Overheating
Thread Starter
|
Mudding
Joined: May 2010
Posts: 149
Likes: 3
From: Eastern Canada
Overheating - coolant in cyl. 3
Hello,
Started to overheat, took into shop - head gasket job went well. Still overheating - after lots of testing found coolant in cylinder 3 at spark plug. Going to swap block with one from my parts truck.
Wondering:
1. How close will this be to my rear main seal - I've been losing oil there for years and would like to replace it if it's close.
2. Is there anything else I should get done at the same time we're doing this?
Thanks!
TDC
Started to overheat, took into shop - head gasket job went well. Still overheating - after lots of testing found coolant in cylinder 3 at spark plug. Going to swap block with one from my parts truck.
Wondering:
1. How close will this be to my rear main seal - I've been losing oil there for years and would like to replace it if it's close.
2. Is there anything else I should get done at the same time we're doing this?
Thanks!
TDC
Last edited by collector87; Aug 3, 2018 at 02:32 PM.
Thread
Thread Starter
Forum
Replies
Last Post
