Does anyone have any tips for removing a ram air housing? I'm slowly working my down to replace the head gaskets, but the ram housing is not cooperating with me. I have the bolts out, but I can't remove the thing. My normal instinct is to use a combination of hammers, chisels, and the screw driver, but I don't want to to that.

Any tips would be helpful. Oh yeah, it's a 4.0 with 109K.

Thanks

 

Sounds like someone sealed it with some good sealant. Probably need to put a piece of wood against it and tap it with the old Rover hammer.

 

Thanks disco mike. The wood and hammer what was neede. Sometimes I forget it is a GM engine from the 1960s...