Rear end clearance questions
#13
Join Date: Apr 2006
Location: Denver, Colorado
Posts: 25,707
Likes: 0
Received 100 Likes
on
82 Posts
![Default](https://landroverforums.com/forum/images/icons/icon1.gif)
Aftermarket bumpers are definately on the list. The front bumper already had a couple of cracks by the headlight washers so the missing chunk is no big deal. I also want a steel bumper for the back since that one was broken when someone rear ended me. I was thinking that even after the front bumper swap that the rear would still be lower than the front. I am estimating that the bumper will drop the front about an 1/2 inch but it would still be unlevel. Plus I am not sure when I will be able to afford the bumpers so I want to make it level. I was told the 751s were the springs to get from this forum and I do like the way that they feel. I just want to make the rear the same without rigging it.
You may want to consider 779's for the front, just beware that if you do play hard and or load the front end tthe 779's may sag with time.
#15
Join Date: Aug 2008
Location: Middle of Caribbean
Posts: 1,174
Likes: 0
Received 104 Likes
on
12 Posts
![Default](https://landroverforums.com/forum/images/icons/icon1.gif)
I agree with Mike, It is VERY level. If you just go off by the distance of the space between the top of the tires and the wheel arches then you will think the rear is lower. And if you look at the direction of all your horizontal lines above the green center line (roof gutter, base line of all the windows, side molding) they get closer to the green line as you get further front. mine is the same way before and after my 2 inch spacer install..(which i don't recommend) lol
Last edited by jycsalas; 05-05-2009 at 11:19 AM.
#16
Thread
Thread Starter
Forum
Replies
Last Post
JJ
Retired - Private For Sale/Trade Classifieds
0
11-04-2008 10:47 AM
SNC
Discovery II
9
04-28-2008 04:11 PM