Share your measurements
Mudding
Joined: Jan 2017
Posts: 141
Likes: 14
I should probably have bounced on the bumpers a little. They are never dead-on, but usually within .5" front to rear and side to side. I've tried to balance out weight both up on the rack and inside the truck. From the photo, though, you can see she sits pretty damned level.
Recovery Vehicle
Joined: Jan 2011
Posts: 1,170
Likes: 300
From: StL, MO
19 inches front and back on the stock 2004 with what I assume is the original shocks and springs.
21 inches front and back on the slightly built 2004. Arb winch bumper on the front. No winch currently. Stock rear bumper. Rear diff guard. HD TF shocks and springs. Don't remember the part numbers.
21 inches front and back on the slightly built 2004. Arb winch bumper on the front. No winch currently. Stock rear bumper. Rear diff guard. HD TF shocks and springs. Don't remember the part numbers.
Three Wheeling
Joined: Apr 2017
Posts: 96
Likes: 1
From: Las Vegas, NV
Terrafirma TF015 Fronts, TF027v Rears, with Fox shocks and 275/70 r18 KO2s.
Front Driver 24"
Front Passenger 23"
Rear Driver 22.5"
Rear Passenger 21.25
Looks like I need to do some leveling.
Front Driver 24"
Front Passenger 23"
Rear Driver 22.5"
Rear Passenger 21.25
Looks like I need to do some leveling.
3rd Gear
Joined: Sep 2012
Posts: 3
Likes: 0
My measurements are off side to side as well. I’m running terrafirma 3” lift with rear sls bag spacers.
Measurements from the ground
LF 36 1/4”
RF 37 5/8”
LR 36 1/2”
RR 35 5/8”
How do I go about leveling the suspension so it doesn’t sag on one side.
Measurements from the ground
LF 36 1/4”
RF 37 5/8”
LR 36 1/2”
RR 35 5/8”
How do I go about leveling the suspension so it doesn’t sag on one side.
Drifting
Joined: Jun 2020
Posts: 48
Likes: 2
This is my 2002 D2, nicknamed "The War Horse"
4" RTE suspension lift
255/85/16 Maxxis bighorns
4.11 diff gears
front and rear Detroit true trac lockers.
HD axles
Front bumper is RTE and rear is Greg Davis.
4.6 V8 installed.
Based on were everyone is measuring I'm doing 23" in front and same in rear.
FYI, the tire is not on the roof to look cool, the tire mount was cracked and rusted, in the middle of repairs right now.
4" RTE suspension lift
255/85/16 Maxxis bighorns
4.11 diff gears
front and rear Detroit true trac lockers.
HD axles
Front bumper is RTE and rear is Greg Davis.
4.6 V8 installed.
Based on were everyone is measuring I'm doing 23" in front and same in rear.
FYI, the tire is not on the roof to look cool, the tire mount was cracked and rusted, in the middle of repairs right now.
Banned
Joined: Jun 2021
Posts: 55
Likes: 3
It depends on the previous maintenance on the 75K miles driven and how that car was Showbox jiofi.local.html tplinklogin driven.
Last edited by bidoulatt; Jun 21, 2021 at 05:10 AM.
Thread
Thread Starter
Forum
Replies
Last Post
ValveCoverGasket
Discovery I
3
Feb 13, 2012 10:05 AM
