Simple CDL question.
#11
#12
https://landroverforums.com/forum/me...t-cdl-5073.jpg
Here is my very low budget CDL. I haven't cut the traction control wire yet. I only engaged it once last winter, but it make a world of difference in deep snow.
Here is my very low budget CDL. I haven't cut the traction control wire yet. I only engaged it once last winter, but it make a world of difference in deep snow.
#13
https://landroverforums.com/forum/me...t-cdl-5073.jpg
Here is my very low budget CDL. I haven't cut the traction control wire yet. I only engaged it once last winter, but it make a world of difference in deep snow.
Here is my very low budget CDL. I haven't cut the traction control wire yet. I only engaged it once last winter, but it make a world of difference in deep snow.
#15
#16
Just for the heck of it I crawled under the Rover today and realized that my CDL actually will stop in 3 spots. Lying under looking back; clockwise bottom of wrench about 8 o'clock, back counter clockwise at about 6 and still counterclockwise at about 4. Does this sound right? Cdl light comes on only in the 8 o'clock position.
#18
Just for the heck of it I crawled under the Rover today and realized that my CDL actually will stop in 3 spots. Lying under looking back; clockwise bottom of wrench about 8 o'clock, back counter clockwise at about 6 and still counterclockwise at about 4. Does this sound right? Cdl light comes on only in the 8 o'clock position.
#19
ok that makes sense. It does not "clunk" when it's at 4 o'clock. So basically it only moves a small amount from 8 o'clock ( in Cdl) and back to 6 o'clock ( normal driving) ?
I actually have it all the way over to the 4 o'clock position. thinking that's where it should be at. But in retrospect I remember when I pulled out the bad t-case I took off the Cdl housing to observe what it does and when you move the nut back and forth and it didn't do anything past 6 ...........back under to move
I actually have it all the way over to the 4 o'clock position. thinking that's where it should be at. But in retrospect I remember when I pulled out the bad t-case I took off the Cdl housing to observe what it does and when you move the nut back and forth and it didn't do anything past 6 ...........back under to move
Thread
Thread Starter
Forum
Replies
Last Post
turbodave
Retired - Private For Sale/Trade Classifieds
1
03-29-2019 07:22 AM