All of my power locks work fine on all doors except for the drivers door. It will not lock or unlock with a single click. However, it will lock if I double click the lock button (super-lock mode). Tab goes down and door is locked from inside and outside.

I have not had a change to tear into the door yet but looking at the wiring diagram it appears that there are two separate wires going to the lock actuator. Hopefully this just means that there is a discontinuity in the standard lock/unlock wire, and the super lock wire and actuator are good.

Has anybody else ever had this issue?

 

i believe there are to separate actuators one for normal lock and one for superlock

 

Thanks for the quick reply. If only the super-lock actuator was engaged would the door be locked from the outside as well?