Taking heads off this weekend, exhaust manifold bolt concerns
#51
Not too happy. Ran the DII for a 20+ mile trip when I got back home I smelled coolant. Hoping it was a leaking hose. I opened the hood and found the expansion tank venting.. I let it cool down and checked the coolant level. I didn't lose any. Oil is clear.
Things I plan to do:
- swap expansion tank cap with one from my parts DII
- combustion gas test (if it fails, I will pull the intake and valve covers and torque the head studs to 100 fl lbs from the 75 when in install them)
Things I plan to do:
- swap expansion tank cap with one from my parts DII
- combustion gas test (if it fails, I will pull the intake and valve covers and torque the head studs to 100 fl lbs from the 75 when in install them)
#53
#54
After I did the heads, my throttle body cooler leaked. I ended up bypassing it.
#55
Not too happy. Ran the DII for a 20+ mile trip when I got back home I smelled coolant. Hoping it was a leaking hose. I opened the hood and found the expansion tank venting.. I let it cool down and checked the coolant level. I didn't lose any. Oil is clear.
Things I plan to do:
- swap expansion tank cap with one from my parts DII
- combustion gas test (if it fails, I will pull the intake and valve covers and torque the head studs to 100 fl lbs from the 75 when in install them)
Things I plan to do:
- swap expansion tank cap with one from my parts DII
- combustion gas test (if it fails, I will pull the intake and valve covers and torque the head studs to 100 fl lbs from the 75 when in install them)
Thread
Thread Starter
Forum
Replies
Last Post
fridgefreezer
4X4 Events and Weekend Outings
2
03-03-2007 10:42 AM