Tightening the sunroof glass screws
I have the T15 bit and was able to tighten the back two screws, the were really loose, on each sunroof.
What are you all using to get tot the front two screws?
Thanks,
What are you all using to get tot the front two screws?
Thanks,
i find that this set https://www.harborfreight.com/100-pc...ase-62657.html
pairs really well with this handle https://www.harborfreight.com/8-piec...ver-92630.html
for getting into small spaces like that.
or sometimes you just use a pair of vise-grips to turn the torx bit.
pairs really well with this handle https://www.harborfreight.com/8-piec...ver-92630.html
for getting into small spaces like that.
or sometimes you just use a pair of vise-grips to turn the torx bit.
i find that this set https://www.harborfreight.com/100-pc...ase-62657.html
pairs really well with this handle https://www.harborfreight.com/8-piec...ver-92630.html
for getting into small spaces like that.
or sometimes you just use a pair of vise-grips to turn the torx bit.
pairs really well with this handle https://www.harborfreight.com/8-piec...ver-92630.html
for getting into small spaces like that.
or sometimes you just use a pair of vise-grips to turn the torx bit.
Originally Posted by mollusc;
pairs really well with this handle [url
pairs really well with this handle [url
https://www.harborfreight.com/8-piece-right-angle-screwdriver-92630.html[/url]
for getting into small spaces like that.
or sometimes you just use a pair of vise-grips to turn the torx bit.
for getting into small spaces like that.
or sometimes you just use a pair of vise-grips to turn the torx bit.
exactly what i was looking for.
looked for my vice grips yesterday but couldn't find them anywhere. so, https://www.harborfreight.com/8-piec...ver-92630.html and new vice grips are on the list.
thanks,
Thread
Thread Starter
Forum
Replies
Last Post
Classklown90
Discovery I
2
Sep 16, 2010 02:59 PM



