Cleaning out shop servicing hoist bringing in the sick disco start to strip down with Atlantic British vid on my laptop for head gasket change. I’m going to remove wheels so I can drop vehicle down to floor easier to work on I have a lift kit installed so pretty high wish me luck I’ll post pics of my findings.

 

Good luck!

Take your time, Organize all your bolts in baggies, keep a record of activity. It’s not a terrible job.

Hardest part for me was was the nerves of doing it for the first time.

 

I’ve done things like this before only on fifties cars lol Landry’s seem to have an aura of misteak about them I’m sure I’ll do ok never shred away from a problem I have s spare for parts it’s motor threw a conecting rod it’s next on the list.

 

Good luck to you!

 

Good luck. Remember to take your time, even if it starts to get frustrating. Snapping a head bolt will ruin your day.

 

Well it’s a 50’s motor with a 90’s top end, so that’s good!

 

https://thegeneralistblog.tumblr.com...rd-of-activity

https://thegeneralistblog.tumblr.com...artstools-list

Here is a blog I wrote about my experience not sure it will help you, but here you go.