Do I need anything else for a valley gasket job other than the valley gasket and 2 end seals? What are the valley gasket end clamps http://www.roverparts.com/Parts/ERR7282.cfm and do I need them?

I've got the valve cover gasket kit with new screws, the valley gasket and 2 end seals in my cart and ready for checkout. Any last minute suggestions?


Thanks for any and all feedback.

 

you reuse the clamps. I think you can get the whole gasket kit at auto zone cheaper than ab.

 

Thanks for the feedback. I don't need the whole kit because I just finished replacing the upper IM gasket and t/body gasket last week. I just need the valley and valve cover gaskets.

Are rocker covers and valve covers the same thing? Found my answer: Yes they are!!.

 

Done!! I hope they get this order here quicker than the last one.

 

by kit I meant vally pan, rubber end caps, and rtv silicon.

 

V/C gaskets and new 8mm plug wires if you have not already replaced them.
Have you already up-graded the upper radiator hose to relocate the bleed screw to the black plastic tee, if not order a hose kit also.

 

I have already replaced 8mm magnecor, bosch plugs, oem paper air filter, IM gasket, upper radiator w/ bleed screw at the tee, belt and thermostat.

I have ordered Valley gasket w/end seals, v/c gasket kit, MAF "O" ring, and the tensioner/idler pulley kit.

That just about covers everything. The beast should be back on the road this weekend.