Discovery 2 LS Conversion
#441
Well my kit is on the way. I'm currently sourcing components. I hope to get it all together when the kit arrives in a 5-6 weeks. I'm in Totem lake / Kirkland off I-405. Welcome to join in on the fun. I'll keep ya posted on things arriving. I'm still struggling to figure out what will and won't work for my LM4 candidate.
#443
So far our conversions have been fine with the factory radiator, even in stop-go traffic with the A/C on in the Florida summer. As long as the factory one is in good condition, it should be okay for the LS.
#444
The following users liked this post:
ACEngineer (08-14-2019)
#445
#446
#447
I went with an iron block because like you said they are cheaper and easier to get. If you are worried about the weight just get hd springs up from.
#448
I probably wouldn’t worry about it, but if you have steel bumper, winch, etc, that may be a different story.
#449
I seem to find them for $750-1500. Yours has lows miles but the 03/04 blocks crack all the time, mine just cracked at 94k so that probably offsets the value of the low miles and averages it out.
#450