General Range Rover Discussion - Archived Archived threads for all Range Rover discussions.
Sponsored by:
Sponsored by:

1999 rr 4.0

Old Oct 3, 2013 | 08:00 PM
  #1  
Trimmie Sanders's Avatar
Thread Starter
|
3rd Gear
Joined: Sep 2013
Posts: 3
Likes: 0
Default 1999 rr 4.0

well it was starting and i replaced plugs and wires and coil paks and it didnt want to start but finally did and turned over but left alone for a 10-15 now it wont start just turn over until battery discharges really need some suggestions without 1000 dollar price tag
 
Reply
Old Oct 3, 2013 | 09:33 PM
  #2  
Fivespddisco's Avatar
Winching
Joined: Jan 2009
Posts: 628
Likes: 18
Default

Originally Posted by Trimmie Sanders
well it was starting and i replaced plugs and wires and coil paks and it didnt want to start but finally did and turned over but left alone for a 10-15 now it wont start just turn over until battery discharges really need some suggestions without 1000 dollar price tag
Do you have a bosh or Gems Motor?
 
Reply
Old Oct 3, 2013 | 09:47 PM
  #3  
Savannah Buzz's Avatar
Super Moderator
Joined: Jan 2011
Posts: 16,322
Likes: 88
From: Savannah Georgia
Default

You can check for spark with one of the old plugs hooked up and laying on a manifold.

You can check for fuel pressure at the passenger side fuel rail (4.0 GEMS) with a tire gauge, 32-34 PSI expected. Pump should run for about 2 seconds when key is turned to position 2.

If fuse for injectors is popped, the injectors won't have power to squirt.
 
Reply
Old Oct 4, 2013 | 10:54 AM
  #4  
drowssap's Avatar
Baja
Joined: Feb 2011
Posts: 9,298
Likes: 318
From: Boston Strong
Default

If the wires were easy you have a Gems.
why did you replace the coils?
have you double checked the firing order?
have you double checked the 12vt wiring to the coil pak?
 
Reply
Old Oct 5, 2013 | 07:48 AM
  #5  
Trimmie Sanders's Avatar
Thread Starter
|
3rd Gear
Joined: Sep 2013
Posts: 3
Likes: 0
Default

its a BOSCH COULD THE TEMPERATURE SENSOR HAVE SOMETHING TO DO WITH IT AND ALSO ONCE IT STARTS ITS RUNNING FINE BUT CUT OFF TO THE POINT OF GETTING COLD OR COOLING OFF IT WONT START AND BY THE TIME IT DOES THE BATTERY IS TO LOW BUT THE CODE I WAS READING READ 1667 BUT WOULD THIS CAUSE IT TO NOT START
 
Reply
Old Oct 5, 2013 | 07:53 AM
  #6  
Trimmie Sanders's Avatar
Thread Starter
|
3rd Gear
Joined: Sep 2013
Posts: 3
Likes: 0
Default

I was also told that because it has a cold start sensor this could also be the issue having to replace the temp. Sensor or cam sensor
confusing
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
kpmaho
Discovery II
1
Mar 30, 2006 09:40 PM
kpmaho
Discovery II
3
Feb 23, 2005 04:39 PM
kpmaho
New Member Introduction
0
Feb 23, 2005 04:39 PM
kfordric
General Tech Help
2
Feb 22, 2005 04:04 AM
deranged
Retired - Private For Sale/Trade Classifieds
0
Dec 16, 2004 09:08 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:40 AM.