Acceptable oil pressure values
Thread Starter
|
Three Wheeling
Joined: Jan 2008
Posts: 54
Likes: 0
Acceptable oil pressure values
I have a 2004 RR. Had a low oil pressure warning last night, but no oil light.
I tested oil pressure values and have them below:
idle 10psi
1000 rpm 20psi
2000 rpm 50psi
Are these too low? If so, am I looking at a new oil pump? Also, is there a write-up on a oil pump R and R?
I tested oil pressure values and have them below:
idle 10psi
1000 rpm 20psi
2000 rpm 50psi
Are these too low? If so, am I looking at a new oil pump? Also, is there a write-up on a oil pump R and R?
Pro Wrench
Joined: Nov 2015
Posts: 1,935
Likes: 189
From: Coastal Georgia
Did you look in your Workshop Manual for the specs? If you don't have one, manuals are available and downloadable sans cost. If you have one already use it.
Specs look like you're good to go if checked per the manual.
......
Start and run engine until normal operating
temperature is reached.
temperature is reached.
......
Last edited by number9; Jan 17, 2016 at 03:58 PM.
Thread
Thread Starter
Forum
Replies
Last Post
carnut
General Range Rover Discussion - Archived
40
Feb 19, 2011 06:50 PM
Chrisinhouston
Discovery II
2
Apr 9, 2010 04:58 PM
