I've got a 2000 Range Rover 4.6 with 83K miles

My Service enging soon light is constantly on.. I get it reset, minutes later it back on.. I've changes the Mass Air Flow meter.. Light still stays on. I get the following error Codes

0734
p1412
p1415

any ideas?

 

I can't find the 1412 and 1415 codes thru 3 different areas, don't know what to tell you. The new MAF should have cleared off your 4 th. gear out of ratio code.

 

Thanks Mike.. is there a Mass Air Flow Meter and sensor? I replaced the Meter.. I saw a site selling the MAF meter and sensor as two separate items?

 

The MAF is attached to the air intake tube between the air filter and the t/body. Normally it is sold as one piece, some places sell just the coil porton of it.

 

did you clear the code and reset adaptions from the transmission control module too?
resetting adaptions is very important to making the code not return.

 

My buddy at the auto repair shop cleared the code using and ODBC Connector???? How do you reset adaptions? Do I need another tool to complete thattask??

Thanks a bunch

 

can his scan tool read engine and transmission codes? if so than he should be able to also reset adaptions.