Hey Guys,

So I gotta get this figured out! I have spent tons and tons of time doing research on these brakes and I still cant find the right fix!

Someone on this forum has got to have the answer I'm sure!

Recently, I had new rims put on my 05" Full Size Range Rover... I changed the rims from 19" to 20".

Soon after, the Summer weather got extremely hot (110F) and I started to notice my brakes squeaking... I can not have squeaky brakes!

They began to get worse, so I figured it was time to take them in to Midas to have a brake job done on them...

I went in and they decided to Re-Surface all 4 Rotors, and also put these big Hot Shot Ceramic Pads on them...

Being only 17 years old, when I heard it was going to cost 675.00, it definitely resulted me in being broke...

Now, I had them done on August 14th, 2012... Today is September 2nd, 2012 and as I am pulling into the Garage, guess what I heard! A nice little squeak!

I already have an appointment made for tomorrow morning to take them in, but I am wanting to get some info from you guys... What is the best quality Brake Pad for these vehicles that prevent squeaking??? I understand that the softer the compound the less squeak, but more brake dust, but really that doesn't matter to me, since I clean the rims weekly...

They squeak as I am almost completely stopping... Its about 5mph to 10mph that I hear them as I slightly push in on the pedal!

Any help is appreciated guys!

Thanks,

Cole Mayfield

 

Had that same problem with my d2.ended up spraying the rotors with brake cleaner solved the issue.