General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.
Sponsored by:
Sponsored by: CARiD

Nomanclature help

Old Sep 22, 2010 | 12:53 PM
  #1  
lostjohn's Avatar
Thread Starter
|
Overlanding
Joined: Sep 2010
Posts: 17
Likes: 0
Default Nomanclature help

I need to replace the bushings in the lower suspension links, but shopping for the parts online, I am not entirely sure the correct naming.

The front bushings are clear, they have a distinctive shape, but the rears I am not completely sure.

Yeah I know, when I pull one then I know, but I'd like to have the parts onhand before I start disassembly.

98 Disco 176K
 
Reply
Old Sep 24, 2010 | 06:27 AM
  #2  
Rovin4life's Avatar
TReK
Joined: Dec 2009
Posts: 2,243
Likes: 10
From: Albany, NY
Default

atlantic british has sets of them and individual
 
Reply
Old Sep 24, 2010 | 06:42 AM
  #3  
antichrist's Avatar
Baja
Joined: Sep 2007
Posts: 5,232
Likes: 52
From: Georgia, USA
Default

I'd just get the kit, probably all need replacing if they are original, with that many years and miles.
Odds are you also need the upper A-Arm ball joint as well.
 
Reply
Old Sep 25, 2010 | 02:42 AM
  #4  
lostjohn's Avatar
Thread Starter
|
Overlanding
Joined: Sep 2010
Posts: 17
Likes: 0
Default

Thanks guys

worked fingers before brain. I checked all other bushes, looks like everything else is tight and not degraded.
Found the bushes I needed on AB, along with the coil set.
I find it a bit strange the OBD tells the shop I have a coil bad, but do running problems. I'm going to replace em all and assume the computer is picking up a voltage irregularity prior to a complete failure.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Speed racer
General Range Rover Discussion - Archived
4
Oct 11, 2008 10:56 PM
Roca316
General Tech Help
3
Mar 18, 2008 11:33 AM
scottinoz
General Tech Help
1
Jun 30, 2007 09:49 AM
cassie11
General Tech Help
3
Jun 23, 2006 10:26 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 10:01 PM.