General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.
Sponsored by:
Sponsored by: DashLynx

start, dont start, start, gauges work, dont work

Thread Tools
 
Search this Thread
 
  #1  
Old 03-08-2011, 05:58 PM
armyeng's Avatar
Overlanding
Thread Starter
Join Date: Feb 2010
Location: maine
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
Default start, dont start, start, gauges work, dont work

Hey guys I am having a tough time with one. I own a 1997 disco. two days ago coming home, holding 1 speed the truck engine died i stepped on the gas and it caught it and it came right back i pulled up to a stop sign and it died, put it in nuetral and it started right back up. then i was coasting at 25 mph and the rpms went up to 3k and stayed there till i put it in park and reved the engine to 4k then it came back down but slowly. I changed the vacuum lines and now the intermediate revving seems to have stopped. but now it starts spuratically. when it starts if you turn the radio on or the lights ot blinkers the rpm,s bounce from 500 to 1500. any ideas what i should start looking at. right now i'm chasing ground wires but havent found anything yet.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mattmo78
Discovery II
12
10-29-2012 12:09 PM
VikingDiesel
Discovery II
17
03-08-2009 09:53 PM
nwaneal
Discovery II
5
10-30-2008 12:54 PM
v8man1
General Range Rover Discussion - Archived
4
01-22-2008 10:49 PM
team510
Discovery II
1
11-22-2007 06:33 PM



Quick Reply: start, dont start, start, gauges work, dont work



All times are GMT -5. The time now is 02:30 PM.