General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.
Sponsored by:
Sponsored by: CARiD

Transfer case does not go out of high gear

Thread Tools
 
Search this Thread
 
Old Aug 5, 2012 | 10:31 PM
  #1  
eitydeuce's Avatar
Thread Starter
|
Mudding
Joined: Jul 2012
Posts: 107
Likes: 4
From: Las Vegas, NV
Default Transfer case does not go out of high gear

00 Disco that I can not get out of high gear. Any ideas? I tried going 5MPH and shifting to N but it does not come out of high gear.
 
Reply
Old Aug 5, 2012 | 10:39 PM
  #2  
nahtanoj's Avatar
Rock Crawling
Joined: Dec 2010
Posts: 313
Likes: 1
From: Poulsbo, WA
Default

you probably need to get under it and clean and lube the linkage.
 
Reply
Old Aug 6, 2012 | 07:02 AM
  #3  
b63215b's Avatar
Mudding
Joined: Jul 2012
Posts: 131
Likes: 0
From: Temperance, MI
Default Clean

Yes, I agree mine was the same then i got under there lubed it and cleaned and now she is good. IT happens for not being used, some make sure you use it and cycle through the gears a couple times a month.
 
Reply
Old Aug 6, 2012 | 07:17 AM
  #4  
Disco Mike's Avatar
Administrator
Joined: Apr 2006
Posts: 25,707
Likes: 107
From: Denver, Colorado
Default

Common issue, you most likely have a shift solenoid on the t/case that has failed. It can be replace or taken out and not used any more.
How mechanical are you?
 
Reply
Old Aug 6, 2012 | 05:43 PM
  #5  
eitydeuce's Avatar
Thread Starter
|
Mudding
Joined: Jul 2012
Posts: 107
Likes: 4
From: Las Vegas, NV
Default

That doesnt sound too bad, whats the best way to change that or where and what do i lube
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gmad
Discovery II
6
May 27, 2015 12:11 AM
BIGTSV
Discovery II
11
Jul 31, 2013 05:36 PM
Illya
General Tech Help
10
Jul 28, 2013 04:25 PM
Lord Wert
Discovery I
7
Mar 27, 2013 06:50 AM
Scott R
Discovery II
3
Dec 25, 2009 03:43 PM




All times are GMT -5. The time now is 06:10 AM.