If i remove the becm from the truck completely will it lose any info and need to be reprogrammed?

 

Why are you removing it? If you were putting it into another truck them it would need to be re-programed but other wise you should be fine.

 

The connector on the rear side facing the passenger side rear floorboard has been kicked probably a 1,000,000 times and is causing the ac control board to intermittently lose power. Gonna remove and take cover off and Hopefully be able to resoldier ... (Hopefully)))

 

i believe the soldier joints on the rear connector facing the passenger side rear floor board has some bad connections on the board. when i wiggle the connector the ac control board intermittently loses power