cheapest and best method to increase ride height
Thread Starter
|
1st Gear
Joined: May 2019
Posts: 1
Likes: 0
cheapest and best method to increase ride height
What is the best and cheapest method to increase my ride height? I'm aware of johnson rods and programming as options. However, I can't figure out what the least expensive programming tool is available that would increase the ride height and store the settings.
Baja
Joined: Nov 2017
Posts: 5,007
Likes: 966
From: Green Bay, WI
Least expensive is RSW Solutions software for just under $200 shipped with a ODBII dongle that works with most other phone apps also. But the software is a little buggy and there is no support - I know this all too well. But it certainly gets the job done.
Winching
Joined: Feb 2016
Posts: 521
Likes: 119
From: Beaumont, CA
My opinion, best is not usually cheapest
If you are potentially spending $100-$200 on just height control, I would advise you just save up a bit more and get the GAP IIDtool
It will do height - and a jillion other important and necessary things
It is truly an indispensable tool, and recommended for any LR3 owner
Mine has probably saved me thousands over paying shop rates for repairs I did myself using the tool
If you are potentially spending $100-$200 on just height control, I would advise you just save up a bit more and get the GAP IIDtool
It will do height - and a jillion other important and necessary things
It is truly an indispensable tool, and recommended for any LR3 owner
Mine has probably saved me thousands over paying shop rates for repairs I did myself using the tool
Last edited by douglastic; May 8, 2019 at 11:38 AM.
Thread
Thread Starter
Forum
Replies
Last Post
