Cleaning Mass Air flow Sensor?
Thread Starter
|
Rock Crawling
Joined: Jul 2013
Posts: 326
Likes: 4
Cleaning Mass Air flow Sensor?
Hi is it safe to pull out the Mass Airflow Sensor and use the Mass Airflow Cleaner Spray on it by CNC I think it's called?
Our repair shop won't do it..say if it gets ruined will need a new one.
I just want it to idle smoothly when AC is on.
The main video that comes up on YouTube when searching just shows how to pull it out and spray..shou should it not dry before putting back in?
Thank you.
Our repair shop won't do it..say if it gets ruined will need a new one.
I just want it to idle smoothly when AC is on.
The main video that comes up on YouTube when searching just shows how to pull it out and spray..shou should it not dry before putting back in?
Thank you.
Baja
Joined: Aug 2013
Posts: 6,891
Likes: 787
From: Huntington Beach CA
If it idles smoothly without the AC on, chances are the surging idle with AC on is normalish. Meaning the vehicle needs higher RPMs to keep the ac happy.
If it surges with AC off, clean the throttle body as suggested(not a bad idea regardless of symptoms).
If it surges with AC off, clean the throttle body as suggested(not a bad idea regardless of symptoms).
Winching
Joined: Feb 2016
Posts: 521
Likes: 119
From: Beaumont, CA
After, let it air dry for another 30 to be safe
If cleaning doesn't help - and you have no CEL - then it is something else
If you DID have a CEL and cleaning doesn't help, then you probably needed an new MAF anyway
I have had success cleaning my Jetta MAF, but not the the LR3. I replaced that one to fix my CEL
Camel Trophy
Joined: Nov 2017
Posts: 4,988
Likes: 962
From: Green Bay, WI
Cool down? Its at ambient air temp unless heat soaked by engine. No need for it to cool down at all. Just spray, put it back in. When the engine starts any residual MAF cleaner will dry off in a split second as the engine pulls air past it.
Thread
Thread Starter
Forum
Replies
Last Post
Bishop
General Range Rover Discussion - Archived
34
Oct 29, 2014 01:27 PM
