LR3 Talk about the Land Rover LR3 within.
Sponsored by:
Sponsored by:

Lr3 instrument cluster issues

Old Dec 11, 2015 | 03:37 PM
  #1  
Smhube00's Avatar
Thread Starter
|
Overlanding
Joined: Dec 2015
Posts: 18
Likes: 0
Default Lr3 instrument cluster issues

Hi all
I have 2009 lr3 hse
Have 80k miles
Last week equipment cluster start acting up
Start getting alarms such as HDC is not available , parking beak errors , tire pressure monitoring system not working ect

It will drive fine until I stop and turn the engine off. It will not start for while.

I took it to the dealer. They are telling me that I have bad instrument cluster

It is going to cost me $1500 to replace it.

Does anybody had similar issues ?

Is there way to fix what is broken on the equipment cluster vs replace the whole thing

Any advise will be appreciated.

Thanks in advance
 
Reply
Old Dec 11, 2015 | 04:51 PM
  #2  
houm_wa's Avatar
Camel Trophy
Joined: Apr 2009
Posts: 4,247
Likes: 482
From: North of Seattle
Default

Check the battery first!!!
 
Reply
Old Dec 11, 2015 | 05:05 PM
  #3  
Smhube00's Avatar
Thread Starter
|
Overlanding
Joined: Dec 2015
Posts: 18
Likes: 0
Default

Checked the battery. It is good
 
Reply
Old Dec 11, 2015 | 05:19 PM
  #4  
TOM R's Avatar
Baja
Joined: Mar 2009
Posts: 5,736
Likes: 230
From: south n.j. and ne va.
Default

Is the passenger Floor wet underneigth the padding
 
Reply
Old Dec 11, 2015 | 05:32 PM
  #5  
KMET's Avatar
Mudding
Joined: Jul 2015
Posts: 151
Likes: 12
From: Los Angeles
Default

Have not heard of cluster failures... Could it be that brake light switch above pedals?
 
Reply
Old Dec 11, 2015 | 05:40 PM
  #6  
Smhube00's Avatar
Thread Starter
|
Overlanding
Joined: Dec 2015
Posts: 18
Likes: 0
Default

Passenger floor is not wet
I change the break light switch just in case, no change
 
Reply
Old Dec 11, 2015 | 05:52 PM
  #7  
KMET's Avatar
Mudding
Joined: Jul 2015
Posts: 151
Likes: 12
From: Los Angeles
Default

Have you tried cycling through gears before trying to start it?

I see you had the CATS replaced recently... Anyone know what parts are removed to change CATS?
 

Last edited by KMET; Dec 11, 2015 at 05:56 PM.
Reply
Old Dec 11, 2015 | 06:31 PM
  #8  
Smhube00's Avatar
Thread Starter
|
Overlanding
Joined: Dec 2015
Posts: 18
Likes: 0
Default

I will try cycling the gears when I get home

Dealer did the cat change under 80k warranty
 
Reply
Old Dec 11, 2015 | 08:25 PM
  #9  
abran's Avatar
Baja
Joined: Aug 2013
Posts: 6,877
Likes: 786
From: Huntington Beach CA
Default

I have a customer that has the same problem.

They bought the cluster from the dealer for $1400, and are having me do the software download and resync.

If it is your cluster, $1500 installed is not that bad.
 
Reply
Old Dec 14, 2015 | 06:21 AM
  #10  
Smhube00's Avatar
Thread Starter
|
Overlanding
Joined: Dec 2015
Posts: 18
Likes: 0
Default

Have you already done this work ? Just wondering whether that fix the problem?

Dealer is telling me that the material cost is $947.
 
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:55 AM.