Proud Rhino Discovery 5
#31
The following users liked this post:
FormerTouaregFan (09-07-2020)
#33
Thanks! They're made by Redbourne Wheels (redbournewheels.com) who make aftermarket wheels exclusively for Land Rovers and Range Rovers. The web site has a fitment guide and a wheel configurator that shows what any of their wheels will look like on your vehicle, right down to the exact vehicle color that was available the year your Land Rover was made.
#34
RE: Lucky8 Light Brackets
THANKS! The instructions were super useful. Here's a list of the changes I made to my installation:
1-Added 6mm spacers to the upper inner welded spacers. This enabled a no-drag fit through the lower grill slots.
2-The horn mounting holes were tight - I removed some paint. The holes size is adequate, pre-painting.
3-Exchanged the bolts supplied with high grade partially threaded bolts, M6 x 40mm.
4-Did some different trimming on the soft plastic side baffles, plus a slot for the harness on the marked "R".
Good result after a bit of nurturing.
THANKS! The instructions were super useful. Here's a list of the changes I made to my installation:
1-Added 6mm spacers to the upper inner welded spacers. This enabled a no-drag fit through the lower grill slots.
2-The horn mounting holes were tight - I removed some paint. The holes size is adequate, pre-painting.
3-Exchanged the bolts supplied with high grade partially threaded bolts, M6 x 40mm.
4-Did some different trimming on the soft plastic side baffles, plus a slot for the harness on the marked "R".
Good result after a bit of nurturing.
The following users liked this post:
ar077 (12-16-2023)
#35
RE: Lucky8 Light Brackets
THANKS! The instructions were super useful. Here's a list of the changes I made to my installation:
1-Added 6mm spacers to the upper inner welded spacers. This enabled a no-drag fit through the lower grill slots.
2-The horn mounting holes were tight - I removed some paint. The holes size is adequate, pre-painting.
3-Exchanged the bolts supplied with high grade partially threaded bolts, M6 x 40mm.
4-Did some different trimming on the soft plastic side baffles, plus a slot for the harness on the marked "R".
Good result after a bit of nurturing.
THANKS! The instructions were super useful. Here's a list of the changes I made to my installation:
1-Added 6mm spacers to the upper inner welded spacers. This enabled a no-drag fit through the lower grill slots.
2-The horn mounting holes were tight - I removed some paint. The holes size is adequate, pre-painting.
3-Exchanged the bolts supplied with high grade partially threaded bolts, M6 x 40mm.
4-Did some different trimming on the soft plastic side baffles, plus a slot for the harness on the marked "R".
Good result after a bit of nurturing.
#36
RE: Lucky8 Light Brackets
THANKS! The instructions were super useful. Here's a list of the changes I made to my installation:
1-Added 6mm spacers to the upper inner welded spacers. This enabled a no-drag fit through the lower grill slots.
2-The horn mounting holes were tight - I removed some paint. The holes size is adequate, pre-painting.
3-Exchanged the bolts supplied with high grade partially threaded bolts, M6 x 40mm.
4-Did some different trimming on the soft plastic side baffles, plus a slot for the harness on the marked "R".
Good result after a bit of nurturing.
THANKS! The instructions were super useful. Here's a list of the changes I made to my installation:
1-Added 6mm spacers to the upper inner welded spacers. This enabled a no-drag fit through the lower grill slots.
2-The horn mounting holes were tight - I removed some paint. The holes size is adequate, pre-painting.
3-Exchanged the bolts supplied with high grade partially threaded bolts, M6 x 40mm.
4-Did some different trimming on the soft plastic side baffles, plus a slot for the harness on the marked "R".
Good result after a bit of nurturing.
#37
I ordered the 6mm long spacers from McMaster-Carr, I live in California and they are an online industrial supplier.
I fitted Baja Designs Squadron Sport spot lights. The price was right. Rigid D-Series Pro Spots would be nice too. I originally sourced some very expensive Rigids but thought the better of it.
I fitted Baja Designs Squadron Sport spot lights. The price was right. Rigid D-Series Pro Spots would be nice too. I originally sourced some very expensive Rigids but thought the better of it.
The following users liked this post:
ar077 (12-16-2023)
#38
I ordered the 6mm long spacers from McMaster-Carr, I live in California and they are an online industrial supplier.
I fitted Baja Designs Squadron Sport spot lights. The price was right. Rigid D-Series Pro Spots would be nice too. I originally sourced some very expensive Rigids but thought the better of it.
I fitted Baja Designs Squadron Sport spot lights. The price was right. Rigid D-Series Pro Spots would be nice too. I originally sourced some very expensive Rigids but thought the better of it.
The following users liked this post:
sowrco (12-16-2023)
Thread
Thread Starter
Forum
Replies
Last Post
Toran
Discovery I
8
03-19-2016 07:39 AM