I mounted some 235/85-16 at3 tires, put some 1” rubber spacers in. Looks great, seems to drive better than the old dry rotted tires. I still have to test it flexed out for rubbing. If anyone has experience with this size tire let me know how it went.

 

Pics or it didn't happen!

 

Happened lol

 

Hvac fixing time. Not as bad to get to as I thought.

 

Well I couldn’t get the blend motor to work so I cut it out, attached a wire to the heat flap and routed it through a hole I drilled in the dash. Maybe not the prettiest solution but I have solid heat and defrost now. I also sealed up the ductwork joints under the dash. The foam gaskets were simply dry rotted out. Big difference now. Also installed a Cb and a new windshield washer pump gasket.

 

Book! appears and I have replaced blend door motors and fuse box. Fuse box needed replacing. Do I need to clear a code?
All functions appear to work properly.
Thx

 

I read somewhere that if you unplug the Hvac control panel for 30 seconds it resets, but I can’t confirm this

 

Thank you I will try it.

 

Here we go. New water pump, belt, pellet bearings

 

Way easier to draw it out. Lol

Gasket removal was the hardest part

Coolant burp, test drive, wash and cruise