I just recently replaced all the bulbs on a 2007 Range Rover Sport HSE that I purchased. Before the installation the passenger side assembly was working fine but some lights were out on the driver side. I decided to upgrade the entire thing. I just put the housings back into place but now the right housing on the passenger side won't light up anywhere. The left works fine and even the turn signal bulb with the canbus load resistor built in works perfectly. But now the passenger side assembly is completely dark with no bulbs lighting up and I get a hyper flash signal on my dash when I try to turn the turn signal on that doesn't light up either. I assume this has something to do with the entire assembly being connected since the whole thing is out but I'm not sure what I need to do. Any help would be appreciated.