When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
My plan of attack would be to find a p38 or 2003-04 disco for cheap and just buy the whole vehicle. that way you can observe it running while in the vehicle and do a full diagnostic work up, including reading plugs, testing for bad head gaskets, listening for knocks, etc. whereas buying a "known good" pull out motor from ebay (or elsewhere) is a complete crap shoot.
Really good idea, there are actually a large number of low mileage good running Disco's being scrapped in the rust belt due to rusted frames not passing inspections. They basically have no value as an intact truck.
Really good idea, there are actually a large number of low mileage good running Disco's being scrapped in the rust belt due to rusted frames not passing inspections. They basically have no value as an intact truck.
they are being scrapped everywhere for a ton of reasons. its sad, but highly advantageous for us guys with tight budgets and good diag skills lol.
the p38's are even worse. I guess the extra electrical components scare the hell out of people, they are even easier to find for $1000 or less than the discos.
They will ship it to me for $200 dollars and I asked him for details and he replied "It is a Longblock- Heads, Valve Covers, Timing Cover, Oil Pan & Block. Everything else you would need to transfer."
Will this be a direct matchup with my current 2000 Disco II w/ SAI. This engine also has the SAI.
I found an '02 P38 4.6 fully rebuilt with new rings, bearings, cam, seals, gaskets, rods, lifters, a complete head gasket kit, etc all for $1000. You should be able to find a better price.
I found an '02 P38 4.6 fully rebuilt with new rings, bearings, cam, seals, gaskets, rods, lifters, etc for $1000. You should be able to find a better price.
This one is off of an 04'. Do the P38 have a direct swap in with the Disco II 2000? I want to make sure I will meet all the damned california engine swap requirements...
But I am sure I can find a P38 for cheaper than the gilded 04' disco.
