Little more messing around with the L322 before I get back to working on the rack and a little down time enjoying life outside the shop

 

Nice!

 

Stupid fan and shroud need to come off

 

Ok got behind in here finally got the alternator out of the l322 cleaned up most of the hurricane mess and I am finally getting back to work on the 110


just have to drill the snapped bolt and it can go back together

did a lot of work on the Excursion and took a family vacation right into hurricane Milton🤦









after nearly 2 weeks we had power and water back at the shop so that was a big day. All the excursion work was done with no power or a generator to charge up things

 

 

Building out the last of the storage in the back of the 110. We are definitely nearing the finish line on the inside of the truck and the last of the drivetrain work.

 

Working on the shift linkages before I close up the tunnel so we can button up the front portion of the interior. CDL buttery smooth, high/low locked up solid and 90 degrees out for the lt85. Will have to swap that portion out and install a fresh gasket.

 

Every time l'm in the house, l think...l should exercise that CDL linkage on the 110 it's been a while. Then l drive it...go in the house. And the thought process starts all over again...

Glad to see your power is back on! And the cleaning of the Excursion tired me out just watching, that was insane.

 

All the excursion work is totally worth it. Such a nice place to be when it’s clean, quiet and the stereo/back up cam are all working. It towed the travel trailer there and back no issues at all. Everyone was comfortable had a nice space to relax or sleep for the trip so.

Been bouncing back and forth from the 110 to the Range Rover supercharged.

I really do think Rover is trolling me on my Facebook feed😂

 

Passenger rear storage is pretty well buttoned up