NEED HELP 1. Tape stuck on eject 2. Misfire Cylinder 5/6
Thread Starter
|
4th Gear
Joined: Jul 2021
Posts: 4
Likes: 0
NEED HELP 1. Tape stuck on eject 2. Misfire Cylinder 5/6
2004 Land Rover Disco
First off took off battery plugs to reset system, ever since tape is stuck on eject mode, and the tape wont come out. Any advice please share.
Next, the Engine Light came on. Checked codes, ran Cylinder 5/6 misfire. Car sounds rough, a slight shake to the car, rumble noise. Heard might be spark plugs.
third time the engine light has come on in the past 2-3 months.
Anything helps. Much thanks
Hannah
First off took off battery plugs to reset system, ever since tape is stuck on eject mode, and the tape wont come out. Any advice please share.
Next, the Engine Light came on. Checked codes, ran Cylinder 5/6 misfire. Car sounds rough, a slight shake to the car, rumble noise. Heard might be spark plugs.
third time the engine light has come on in the past 2-3 months.
Anything helps. Much thanks
Hannah
Last edited by heyhannah; Aug 22, 2023 at 01:08 PM.
TReK
Joined: Mar 2010
Posts: 2,778
Likes: 627
From: NYC
1. You have posted in the Discovery 1 section (1993-1999)
2. spark plug and/or spark plug wire could be a simple fix.
3. Do you have a code reader? If not, get one like this... https://landroverforums.com/forum/di...02/#post581013
4. Manuals (aka: RAVE) can be found in the link in my signature. Help yourself.
2. spark plug and/or spark plug wire could be a simple fix.
3. Do you have a code reader? If not, get one like this... https://landroverforums.com/forum/di...02/#post581013
4. Manuals (aka: RAVE) can be found in the link in my signature. Help yourself.
Thread
Thread Starter
Forum
Replies
Last Post
casanova00
Discovery II
20
Jul 28, 2008 10:57 PM
