Please Help, Replaced Rear Rotors on my Discovery 1 and now it can't go out of park
#11
#12
#13
Don't forget to be careful. There's nothing stopping you now from throwing it straight from D to R while moving.
#14
Same issue every time I change brakes..
Hi there- I know this is a little late from when you posted but I have had the same issue each time I’ve changed my brakes.. first was 2 years ago I did my front and ended up stuck in park for over a month- one day it just fixed itself… now I changed the rear about a month ago and same deal- stuck in park. I go through the usual process, code read, brake light switch, changed some fuses, looked over all electrical, even removed and replaced brakes and rotors. Still no answer. All fluids are full. I can use the emergency lever under the shifter to get in reverse and in a gear- not sure which it is, but it gets me going only in 1 gear tho…. Curious if you had any thoughts?
#15
Hi there- I know this is a little late from when you posted but I have had the same issue each time I’ve changed my brakes.. first was 2 years ago I did my front and ended up stuck in park for over a month- one day it just fixed itself… now I changed the rear about a month ago and same deal- stuck in park. I go through the usual process, code read, brake light switch, changed some fuses, looked over all electrical, even removed and replaced brakes and rotors. Still no answer. All fluids are full. I can use the emergency lever under the shifter to get in reverse and in a gear- not sure which it is, but it gets me going only in 1 gear tho…. Curious if you had any thoughts?
If no:
Take your shifter head apart and ensure the gear lock functionality works and there isnt any trash jammed along the gear lock shaft. Lube the gear lock shaft as well if its stiff.
#17
#18
Thread
Thread Starter
Forum
Replies
Last Post
RobK
General Tech Help
5
05-24-2011 08:41 PM
clockmaker21
New Member Introduction
1
01-07-2010 09:20 AM
illuminum
General Range Rover Discussion - Archived
2
10-08-2007 05:34 PM