So what did you do to your Disco today?
Met with my friend that has the used tire shop.
He got me a set of 5 Firestone Transforce HT 245x75x16 tires to replace the mis-matched 235x65x16 car tires that P.O. had been running.
Wider ( I am not thrilled )
Taller ( I am thrilled )
and a matched set of LT ( I am ecstatic ).
This is the only pic I got before it got dark...
Okay - mounted!
He got me a set of 5 Firestone Transforce HT 245x75x16 tires to replace the mis-matched 235x65x16 car tires that P.O. had been running.
Wider ( I am not thrilled )
Taller ( I am thrilled )
and a matched set of LT ( I am ecstatic ).
This is the only pic I got before it got dark...
Okay - mounted!
Last edited by JC Speiser; Feb 16, 2013 at 06:47 PM.
Camel Trophy
Joined: Nov 2009
Posts: 4,079
Likes: 227
From: IL
Finally got my steering damper installed re-installed. I painted the shield black, cleaned the ret, slapped a LandRover sticker on it, and coated the whole thing with clear acrylic.
I made the frame bracket from 1/4 aluminum angle and the drag link bracket is a tube clamp from Ballistic Fab with a couple tabs welded on by my boy, Jake1996D1.
I made the frame bracket from 1/4 aluminum angle and the drag link bracket is a tube clamp from Ballistic Fab with a couple tabs welded on by my boy, Jake1996D1.
Pro Wrench
Joined: Apr 2010
Posts: 1,450
Likes: 2
From: Upstate South Carolina
Rover Tracks HD Tie Rod and Drag Link (thanks to fishEH) w/2 new greasable TREs, OME D2 dampener, and a refill of fresh Rotella. Also thoroughly cleaned the underside of the motor so I can identify oil leaks to tackle on the next oil change. BTW Brett, I liked your steering dampener idea but I had to put my own twist on it....
Three Wheeling
Joined: Jan 2010
Posts: 66
Likes: 0
From: SF Bay Area
Replaced the rear output seal and thouroughly cleand the parking brake shoes, drum and fixin's. Fabricated some extention tabs for lights of the SD Rack. It's a DII rack on a DI so the light mounts are about at the window line. The new tabs send the liights back about 4" which, I hope, will reduce tha glare on the dash. Picked up a ladder a while back and had a chance to remove all the rust and coating and prep it down to the metal. All parts or hanging on the paint tree waiting for their next coat ;-)
Camel Trophy
Joined: Nov 2009
Posts: 4,079
Likes: 227
From: IL
Replaced the rear output seal and thouroughly cleand the parking brake shoes, drum and fixin's. Fabricated some extention tabs for lights of the SD Rack. It's a DII rack on a DI so the light mounts are about at the window line. The new tabs send the liights back about 4" which, I hope, will reduce tha glare on the dash. Picked up a ladder a while back and had a chance to remove all the rust and coating and prep it down to the metal. All parts or hanging on the paint tree waiting for their next coat ;-)
