Ok, wasnt getting much attention with my other post. Changed out the sensor and it cleared the 3 amigos. Problem is traction control comes on at about 25-30 mph and when I turn sharply. I took the wheel and things back off and noticed that the where the sensor plugs into the drum is kind of gritty. What can I clean that with. Obviously I wouldnt spray anything in it but could I just clean it with a q-tip or compressed air or something? any help would be appreciated!!

 

Drum? Do you mean the hub assembly? Are the bearings loose? If compressed air doesn't clean it out, I'd probably spray it down with something before I replace it. Those hubs are pricey.