..:: The blower situation ::..
#11
Hi All!
Happy to report that second maintenance attempt was a success.
Blower have been working just fine since Sunday, and no noise.
I do think it might not be running up to speed, but that might be a perception issue, actually don't recall how strong it blew when I bought it, or haven't been able to compare it to a similar truck, meanwhile I'm happy, besides #WinterIsComing.
Those instructions are on point, although no good explanation is given on how to get the Squirrel Cage out -I used a screwdriver and a hammer; and firmly, but gently, delivered a tap on the shaft until it slid out, you could see the dirt that came out during the hammering process.
Sprayed a new can of Electronic Cleaner in there, but couldn't find the 3-IN-ONE for motor applications, so ended up buying the regular one.
Thanks all and good luck to those attempting the Blower Revival! ;-]#
Happy to report that second maintenance attempt was a success.
Blower have been working just fine since Sunday, and no noise.
I do think it might not be running up to speed, but that might be a perception issue, actually don't recall how strong it blew when I bought it, or haven't been able to compare it to a similar truck, meanwhile I'm happy, besides #WinterIsComing.
Those instructions are on point, although no good explanation is given on how to get the Squirrel Cage out -I used a screwdriver and a hammer; and firmly, but gently, delivered a tap on the shaft until it slid out, you could see the dirt that came out during the hammering process.
Sprayed a new can of Electronic Cleaner in there, but couldn't find the 3-IN-ONE for motor applications, so ended up buying the regular one.
Thanks all and good luck to those attempting the Blower Revival! ;-]#
#12
#GOT
Last edited by JUKE179r; 11-02-2016 at 05:52 PM.
#13
Hello Roverers!
In the past couple weeks I've been noticing the blower revving up or down, and at max speed -supposedly- it sounds and feel like it is not blowing strong enough.
If you read this post, you'll know I took it apart and did an already known maintenance to it, since then not squeaky noises and turns on and off on point; I just don't feel is blowing hard enough, and also the revving issue, so any ideas where to look? besides the "time for a new blower" recommendation? thanks!
In the past couple weeks I've been noticing the blower revving up or down, and at max speed -supposedly- it sounds and feel like it is not blowing strong enough.
If you read this post, you'll know I took it apart and did an already known maintenance to it, since then not squeaky noises and turns on and off on point; I just don't feel is blowing hard enough, and also the revving issue, so any ideas where to look? besides the "time for a new blower" recommendation? thanks!
Thread
Thread Starter
Forum
Replies
Last Post
RovingRiesensCubed
Discovery II
14
01-12-2008 01:11 PM