Camshaft position sensor reinstall - does this look right?

Reply Subscribe

Thread Tools

Search this Thread

#11

07-31-2021 | 12:47 AM

sodaparis

Drifting

Joined: Oct 2020

Posts: 25

Likes: 1

From: Portland Oregon

Quote:

Originally Posted by Brandon318

With a new o-ring on, it sort of sits cockeyed.

maybe it’s the wrong o-ring, correct one should be ERR4815. Might also be some build up in there keeping it from fully seating.
cost is less than $2.00 ($4.00 at the dealer)

Reply Like

#12

07-31-2021 | 10:52 AM

Brandon318

Thread Starter

Pro Wrench

Joined: Apr 2019

Posts: 1,632

Likes: 444

From: Monterey, CA

Quote:

Originally Posted by sodaparis

maybe it’s the wrong o-ring, correct one should be ERR4815. Might also be some build up in there keeping it from fully seating.
cost is less than $2.00 ($4.00 at the dealer)

Good thoughts, but yeah, it’s the correct o-ring and I cleaned the front cover to near surgical cleanliness before reinstalling. I took it out and reset it, still a little off, but not as bad. Left it that way. It’s no biggie to take it out again once it’s in the car to readjust if needed.

Reply Like

The following users liked this post:

Black Dynamite (08-03-2021)