I swapped out the motor, still doesn’t work. I put power to both motors and they both work. Any ideas?

2003 D2

 

What happens when you hit the button? Any sounds? I’d check fuses and the switch. When you changed the motor did you reinstall the regulator correctly? I’d also check for 12v at the plug when working the button, that will tell you a lot.

 

nothing happens when I hit the switch. Fuses are good, switch is good. I didn’t have time to see if any voltage was hitting the motor. I’ll do that later this week.

 

Pull back the rubber flex piece that the wires run through and look for a broken wire.

 

Did you have a chance to check the wires? This is what I found on mine after changing the motor and regulator

Broken wire prevented window from working

 

I havent had a chance to jump into it yet. I have been upside down with work

I am hoping to get at it over the weekend.

 

Boy, do I get that. Good luck