Discovery II Talk about the Land Rover Discovery II within.
Sponsored by:
Sponsored by:

Finally did it! New Discovery Owner

Old Aug 29, 2015 | 02:25 PM
  #1  
Simple8's Avatar
Thread Starter
|
Drifting
Joined: Aug 2015
Posts: 32
Likes: 0
From: Atlanta,Ga.
Default Finally did it! New Discovery Owner

Taken delivery of a 2002 Discovery Series 2 later today. Has 99,580 miles on it. Its coming from Miami and has been there it's whole life. It belonged to a Dr. and was maintained by the Land Rover dealer there (I have the records from the dealership). It had the 95,000 mile service done already. So my question is "What is the first bit of maintenance I should perform being so close to the 100k mark?" I mean the absolute first thing I should do? Any opinions will be much appreciated.
 
Attached Thumbnails Finally did it! New Discovery Owner-%24_4-14.jpg  
Reply
Old Aug 29, 2015 | 03:19 PM
  #2  
OffroadFrance's Avatar
Joined: Aug 2013
Posts: 5,845
Likes: 368
From: Near Bordeaux, France
Default

Hi, welcome to the LR world and club. Pick your way through this sticky and decide what has been done and what still needs to be done.

https://landroverforums.com/forum/di...service-29020/
 
Reply
Old Aug 29, 2015 | 03:21 PM
  #3  
Alex_M's Avatar
Camel Trophy
Joined: Aug 2014
Posts: 4,743
Likes: 985
From: Southwestern Virginia
Default

If it's been dealer maintained its whole life then you should be in pretty good shape. The only real thing I'd check would be all of the rubber bushings under the truck as well as ball joints and tie rod ends. Also, the dealer probably put 5w20 synthetic something in it. I'd switch it over to some Rotella or Rotella T5 to protect the cam and lifters. Mostly I'd just go through the sticky life OffroadFrance recommends
 
Reply
Old Aug 29, 2015 | 06:41 PM
  #4  
Darover's Avatar
Recovery Vehicle
Joined: Feb 2007
Posts: 1,088
Likes: 1
From: Ottawa, Ontario, Canada
Default

Originally Posted by Simple8
"What is the first bit of maintenance I should perform being so close to the 100k mark?" I mean the absolute first thing I should do? Any opinions will be much appreciated.
Pray my friend, pray ;-)

Seriously, I would change the front d-shaft u-joints first, then change all fluids.
 
Reply
Old Aug 30, 2015 | 12:33 AM
  #5  
dgi 07's Avatar
Pro Wrench
Joined: Feb 2011
Posts: 1,570
Likes: 99
From: People's Republic of New Jersey.
Default

Welcome to the fold. Headgasket worries are on the left. Slipped liners are on the right. Electrical problems are in the back.....

Seriously. A new front propshaft and keep it moving.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ske
Discovery II
5
Mar 28, 2014 11:02 AM
dstrid
New Member Introduction
2
Sep 6, 2012 02:51 PM
thequickervicar
New Member Introduction
0
Aug 9, 2010 08:01 PM
mrcrptguy
Discovery II
16
Oct 16, 2009 08:12 PM
nynole
Discovery II
2
Jan 19, 2008 01:26 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:47 PM.