Knock sensor connector repair
#11
01-12-2017 | 09:38 AM
Thread Starter
|
Pro Wrench
Joined: Nov 2016
Posts: 1,611
Likes: 112
From: Bham, Alabama
I just did this recently. Since it's right at the conne tir you can cut the connectors off a junk loom up to the splice(the 2 wires go to one in a bizarre splice) and solder/heat shrink both wires.
or email Paul in the U.K., he has what you need.
lr_connectors@btinternet.com
or email Paul in the U.K., he has what you need.
lr_connectors@btinternet.com
#12
01-12-2017 | 07:54 PM
Thread Starter
|
Pro Wrench
Joined: Nov 2016
Posts: 1,611
Likes: 112
From: Bham, Alabama
I just did this recently. Since it's right at the conne tir you can cut the connectors off a junk loom up to the splice(the 2 wires go to one in a bizarre splice) and solder/heat shrink both wires.
or email Paul in the U.K., he has what you need.
lr_connectors@btinternet.com
or email Paul in the U.K., he has what you need.
lr_connectors@btinternet.com
emailed him him and no luck. He doesn't have em
Thread
Thread Starter
Forum
Replies
Last Post