I do. DiscoMike said they updated some software on this site so the pics arent coming up. I have PM DeepBlueWater yesterday to see if I can get the pics, or if he could upload them again. If he sends them my way, I will be sure to forward them to you as well.

 

I would love to get the pics as well... This is still on my to do list as part of the 60K service. I was even considering leaving the old wires because I could not see taking them off without removing the manifold. The wires are stll in ok condition, but I would like to replace with Magnacore as they seem to be the favorites here. If you get the pics, please feel free to pass them on to me...

Thanks!!

 

This is a great article, could you you repost the images?

 

I'm doing this on Friday of this week...I'll post pics of the process

 

I had a 2001 for a short time and changed the wires without removing the IM. I have large hands and did it in about 1 1/2 hours. I removed all of the wires and then installed the lower bank first and then the upper bank. I still had a misfire and removed them and reinstalled again to make sure they were correct. The second time it only took about an hour. The pictures will help you. I found it harder to remove the old wires from the coil pack than installing the new ones.

 

Bump... Pictures would be awesome. I have wires on order and was going to try to DIY the job.

 

Last night I helped another site member install his new Magnacor wire on a 03 with SAI, didn't pull the manifold, just a couple of pipes and it fired up just as smooth as could be, so it can be done, even without the pictures.

 

Images added after forum application data exchange....

 

Awesome, thanks Deepblue.

 

I just did it yesterday and It worked out fine. I was able to do it following the simple steps.

Thanks so much,
R2racer