Is this a DYI project ?
2000 LR Discovery II
Thank you !

 

Yes it's very easy you just need a ratchet/socket with a long extension to loosen the tensioner pulley, pull the old belt, put on the new belt, done. Make sure you get the correct belt depending if you have ACE or not.

 

I just bought the LR forgive me .... ACE ??
Thanks for your help,
Chip

 

Automatic Cornering Enhancement. The ACE pump is another pump on the auxiliary belt so you would need to get the longer belt.

 

W/O looking I assume I have this pump... I did notice the dual fluid resevoir. One being for power steering and the other for cornering or leveling ??
Chip

 

Sounds like it yes. It would be the pump/pulley above the power steering pump and to the right/below the AC compressor. Here is the different layout when you install it:

http://www.roversnorth.com/store/c-3...g-heating.aspx

 

Thank you VERY much !!
Chip

 

How many miles on your truck, have you replaced your upper radiator hose assembly to the new system to prevent an over heat problem, are all your services done, refer to my list at the top of the Discovery section, what about your front drive shaft, has it been rebuilt yet?

 

109K on the clock. i do not know what has been done, we just purchased it. Many new parts are evident ubder the hood however.