What did you do with your DII today?
#7461
I finally finished my double din dash mod. Started last fall and finally had time to finish with reduced hours.
the only problem I have with it is that I am only picking up 3 stations. I ordered the wye adapter hoping it will solve the issue as I'm only able to use the larger antenna lead right now.
I have scoured the forum and get conflicting ideas on it. From what I've gleaned, the antenna amps get powered with the amp. The amp warms up to the touch, and I have sound by using the metra plug with the pre outs, so, my estimation is that the ant amp is working but needs the second ant.
sorry for the crap pic.
the only problem I have with it is that I am only picking up 3 stations. I ordered the wye adapter hoping it will solve the issue as I'm only able to use the larger antenna lead right now.
I have scoured the forum and get conflicting ideas on it. From what I've gleaned, the antenna amps get powered with the amp. The amp warms up to the touch, and I have sound by using the metra plug with the pre outs, so, my estimation is that the ant amp is working but needs the second ant.
sorry for the crap pic.
#7463
Looks great. One question. Is it possible to install this Badland winch when the ARB bumper is in place already? Or do I have to mount the winch to the bumper first and then install the bumper? The reason I am asking: I need a new bumper and add the winch later because of weight (no lift yet).
#7464
Looks great. One question. Is it possible to install this Badland winch when the ARB bumper is in place already? Or do I have to mount the winch to the bumper first and then install the bumper? The reason I am asking: I need a new bumper and add the winch later because of weight (no lift yet).
#7465
The following 4 users liked this post by The_OGCJR:
#7466
#7467
The following 7 users liked this post by MrValingo:
DiscoID (05-19-2020),
JUKE179r (05-06-2020),
No Doubt (05-06-2020),
Richard Gallant (05-06-2020),
Sixpack577 (05-06-2020),
and 2 others liked this post.
#7468
The following 3 users liked this post by whowa004:
#7469
The following 3 users liked this post by DCDisco2:
#7470
Good news! Last week, I set out to replace my fan clutch and fan with the Hayden Severe Duty clutch and the Dorman 620 fan that's been recommended by the forum. Once i had it all apart, it turned out that my water pump shaft had a good amount of play. Lucky8 came through with quick shipping and today I installed the new water pump.
The overwhelming majority of my time was spent trying to scrape off the old gasket. Hopefully a "good enough" attitude works here - I genuinely did get nearly all of it off, but there were 3 or 4 little patches of super thin gasket that just wouldn't come off - and continuing to try was chewing up the front cover. We'll see, I guess.
Initial thoughts on the new fan: it's SO loud. Holy ****. Still bleeding the system but so far my temps seem to be the same - maybe a tiny bit lower at idle. I'm sure this will help once I get my AC fixed.
Old pump didn't look too bad, either:
The overwhelming majority of my time was spent trying to scrape off the old gasket. Hopefully a "good enough" attitude works here - I genuinely did get nearly all of it off, but there were 3 or 4 little patches of super thin gasket that just wouldn't come off - and continuing to try was chewing up the front cover. We'll see, I guess.
Initial thoughts on the new fan: it's SO loud. Holy ****. Still bleeding the system but so far my temps seem to be the same - maybe a tiny bit lower at idle. I'm sure this will help once I get my AC fixed.
Old pump didn't look too bad, either:
The following 3 users liked this post by boston4: