changing abs ring
#1
changing abs ring
hi guys, i changed the front left abs sensor this morning on the freelander as i had the 3 amigos and diagnostics said it was the front left abs sensor.
so i changed that by drilling out the old one as it was stuck.
the 3 amigos are now off which is good
but, now there is a pulsing through the brake pedal when braking which wasnt there before.
Now i recon i have damaged the abs ring when drilling out so so have ordered a new one off ebay for about 6 quid.
So, is it as easy as, wheel off
32mm 3/4" breaker bar to get the hub nut off
2 bolts from strut off.
Shaft out of hub
tap off old abs ring
tap on new abs ring and put it all back together?
so i changed that by drilling out the old one as it was stuck.
the 3 amigos are now off which is good
but, now there is a pulsing through the brake pedal when braking which wasnt there before.
Now i recon i have damaged the abs ring when drilling out so so have ordered a new one off ebay for about 6 quid.
So, is it as easy as, wheel off
32mm 3/4" breaker bar to get the hub nut off
2 bolts from strut off.
Shaft out of hub
tap off old abs ring
tap on new abs ring and put it all back together?
Thread
Thread Starter
Forum
Replies
Last Post