General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.
Sponsored by:
Sponsored by: CARiD

2006 LR3 HSE Transmission

Thread Tools
 
Search this Thread
 
Old May 20, 2011 | 09:33 AM
  #1  
cmpintosantos's Avatar
Thread Starter
|
5th Gear
Joined: May 2011
Posts: 5
Likes: 0
From: kearny nj
Default 2006 LR3 HSE Transmission

I have 2006 LR3 HSE and 2 times in the past week seems like the transmission is slipping. When I came to a complete stop and then went to hit the gas, it seemed like it didnt want to go for a few seconds. The last time I even notice that the screen that tells you if your in P R N D showed nothing and then when it started to move the D appeared. Anyone with a similiar stituation. I took it to a mechanic already but the check engine lightwas not on and has never gone on but they check the Transmission Computer and no message. They also took it for a ride and all seems well.
 
Reply
Old May 20, 2011 | 07:46 PM
  #2  
Spike555's Avatar
Team Owner
Joined: Jun 2007
Posts: 26,212
Likes: 98
From: Grand Rapids MI
Default

Have the battery and alternator tested for proper voltage, if the transmission computer does not get enough power it will cause the transmission to act up.
 
Reply
Old May 26, 2011 | 02:25 PM
  #3  
Morin-Heights's Avatar
1st Gear
Joined: May 2011
Posts: 1
Likes: 0
From: Morin-Heights, Quebec, Canada
Default 2006 HSE Transmission Issue

I have the exact same issue at 104,000Km. However the battery is new. Did you ever get it fixed and what was the exact resolution?

I'm going to bring mine into the dealer shortly.
 
Reply
Old May 27, 2011 | 09:43 AM
  #4  
cmpintosantos's Avatar
Thread Starter
|
5th Gear
Joined: May 2011
Posts: 5
Likes: 0
From: kearny nj
Default

No...I haven't fixed it...I think I'm just going to get rid of it...I have had car with transmission problems before and this looks like it's heading in the same direction...I'm done paying for expensive repair and end having to get a new car...so I think it's time to cut my losses and let it go...even though I LOVE this truck!!!

- Morin-Heights - Keep me posted...
 

Last edited by cmpintosantos; May 27, 2011 at 01:50 PM.
Reply
Old Jun 1, 2011 | 06:08 AM
  #5  
Rovin4life's Avatar
TReK
Joined: Dec 2009
Posts: 2,243
Likes: 10
From: Albany, NY
Default

Dont get rid of it, get it reprgrammed. You will need both the ecu and the tcu programmed by the dealer. Happens all the time. We have a bulletin for it. but only the dealer has the programming.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cmpintosantos
LR3
5
Sep 24, 2018 02:32 PM
Joey1
General Tech Help
4
Apr 4, 2015 10:32 PM
matt5963
LR3
3
Jan 16, 2012 08:58 AM
Bean
LR3
10
Jul 15, 2010 11:13 AM
MagnaflowRep
Headers, Intake, & Exhaust
1
Sep 2, 2009 12:26 PM




All times are GMT -5. The time now is 04:51 AM.