General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.
Sponsored by:
Sponsored by: CARiD

P0102 code....

Old Sep 9, 2011 | 01:50 PM
  #1  
town10's Avatar
Thread Starter
|
4wd High
Joined: Sep 2011
Posts: 9
Likes: 0
Default P0102 code....

First time post....so apologize if this topic has been attended to in the past. i have 2002 discovery 2 ,Service engine soon light came on with autozone code read to be P0102. everything i read was MAF...i do offroad and noticed my engine cut off recently when i hit decent water hole, but wasnt deep enough imo to cut off, found it strange... i took air filter out and noticed trash in the bottom of the filter box due to some idiot that changed air filter last did not latch correctly and bent flap leaving a filter box open...also looked like a mouse ate a small hole in filter so i was getting trash, dirt, water etc past the filter. I pulled the MAF and cleaned with crc maf cleaner..changed filter and refit filter box. Service engine soon light is still on, its been one day. Anythoughts? thank you in advance
 
Reply
Old Sep 9, 2011 | 10:08 PM
  #2  
Rovin4life's Avatar
TReK
Joined: Dec 2009
Posts: 2,243
Likes: 10
From: Albany, NY
Default

put a maf sensor that is OEM before it completely shuts down in a bad way. Seen a few do that and it leaves the person stranded.
 
Reply
Old Sep 12, 2011 | 02:12 PM
  #3  
town10's Avatar
Thread Starter
|
4wd High
Joined: Sep 2011
Posts: 9
Likes: 0
Default

OEM? original part...Bosch?

maf didnt seem bad visually, is there a way i can reset it, or maybe be something else?
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ben Walker
Discovery II
12
May 21, 2013 01:15 AM
travispeterson1974
Discovery II
17
Oct 5, 2012 11:10 AM
seamuspg
Discovery II
5
Apr 5, 2011 08:50 AM
osolupo
Discovery I
1
Aug 20, 2010 08:47 PM
lifewithoutanet
Discovery II
0
Dec 1, 2008 11:51 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:01 PM.