Fuel Injector Tip
#1
Fuel Injector Tip
Hi Folks.
My mechanic friend started taking the engine on my 2002 Discovery II apart yesterday to replace the blown head gasket. During the tear down, he notices the fuel injector tips need to be replaced. He described them as either being red or brown in color and shaped like a derby. I looked and found the O ring seal kits we need, but not the injector tips. Any thoughts? Do I need to buy new injectors, or can anyone point me to what he is describing?
Thanks for the help!
My mechanic friend started taking the engine on my 2002 Discovery II apart yesterday to replace the blown head gasket. During the tear down, he notices the fuel injector tips need to be replaced. He described them as either being red or brown in color and shaped like a derby. I looked and found the O ring seal kits we need, but not the injector tips. Any thoughts? Do I need to buy new injectors, or can anyone point me to what he is describing?
Thanks for the help!
#3
As in, you them throw away? As I understand the text from my mechanic, this is the end of the injector that goes in to the intake that has the tip we are looking for (that you throw away), not the end of the fuel rail. Just to be clear.
Thank you!
Thank you!
#4
Yes, the part that basically holds the o ring on and looks like a c-clip. Not what holds the injector on to the rail.
I throw them away, they break while replacing o rings and are used for keeping them on and something with fuel flow. As others have mentioned here they aren't needed with these engines and can be discarded.
All of my trucks that I've head the top end apart I have them thrown away. Or if I replace injector o rings I'll toss them.
I throw them away, they break while replacing o rings and are used for keeping them on and something with fuel flow. As others have mentioned here they aren't needed with these engines and can be discarded.
All of my trucks that I've head the top end apart I have them thrown away. Or if I replace injector o rings I'll toss them.
#5
#6
Thanks as always!
#7
The following users liked this post:
shanechevelle (05-27-2019)
#8
If it was simple I wouldn't care, but ripping all that sh#t off isnt worth it. Buy those rebuilts off of Ebay, I have a set in my rover now.
Thread
Thread Starter
Forum
Replies
Last Post