idiots quest for more power?
#61
Title: Title - YouTube
Here you go, man. Just remember, the video makes it sound WAY louder than it actually is. The lifters are barely louder than stock.
Here you go, man. Just remember, the video makes it sound WAY louder than it actually is. The lifters are barely louder than stock.
sounded great In cabin and at pipe.
thanks again
cel?
#62
you will need new ones depending on cam lobe length.
on my ls2 i went with longer pushrods and harder ones as well. although its recommended at times to get stock strength pushrods because its cheaper to replace bent pushrods than a piston with a valve stuck on it.
on my ls2 i went with longer pushrods and harder ones as well. although its recommended at times to get stock strength pushrods because its cheaper to replace bent pushrods than a piston with a valve stuck on it.
#63
Yea, at 130k she's still running with the factory original MAF. It's been going out for over a year (so it's not the K&N which I've only had ~5 months). Looks like it's time to spray some electrical cleaner on it again. Or replace it.
I'm actually suprised that my amigos weren't on. I've been dealing with them too. Actually, I haven't, I've been ignoring them.
I'm curious to see what your truck will be able to do when you're done, I hope to see an album of pictures along with some numbers. Right now mine will do 0-60 in about 9.5 seconds depending on conditions, and that's loaded down and on 30" tires instead of stock 29".
Last edited by Alex_M; 10-28-2014 at 09:17 AM.
#64
#65
#66
still header shopping.
anyone have the hedmans fitted? not liking the spacer for lhd set up and they are w/o bung. that #39800
really want janspeed but can't even find out if the are still available. found a pirate convo from '04 mentioning x4ag as a source
not sure what the rpi set up is
v8 tuner has this= Competition Land Rover Discovery/Range Rover 4 - 2 - 1 Exhaust Manifolds - V8 Tuner
anyone have the hedmans fitted? not liking the spacer for lhd set up and they are w/o bung. that #39800
really want janspeed but can't even find out if the are still available. found a pirate convo from '04 mentioning x4ag as a source
not sure what the rpi set up is
v8 tuner has this= Competition Land Rover Discovery/Range Rover 4 - 2 - 1 Exhaust Manifolds - V8 Tuner
#67
#68
#69
still header shopping.
anyone have the hedmans fitted? not liking the spacer for lhd set up and they are w/o bung. that #39800
really want janspeed but can't even find out if the are still available. found a pirate convo from '04 mentioning x4ag as a source
not sure what the rpi set up is
v8 tuner has this= Competition Land Rover Discovery/Range Rover 4 - 2 - 1 Exhaust Manifolds - V8 Tuner
anyone have the hedmans fitted? not liking the spacer for lhd set up and they are w/o bung. that #39800
really want janspeed but can't even find out if the are still available. found a pirate convo from '04 mentioning x4ag as a source
not sure what the rpi set up is
v8 tuner has this= Competition Land Rover Discovery/Range Rover 4 - 2 - 1 Exhaust Manifolds - V8 Tuner
A bung isn't that big if a deal. Any exhaust shop worth a dime can drill or cut a hole and weld one in.
#70