What did you do with your DII today?
Pro Wrench
Joined: Dec 2012
Posts: 1,364
Likes: 31
From: Placerville, CA USA
Had "the" vibration happening, so pulled the drive shaft. My shop was busy, so I ordered a "new" unit from DriveshaftPower.com for $250. It arrived today, and I put it in. It looks nice and is serviceable. Disco drives great now, on to the spongy breaks, the leak from the seatbelt and tres amigo's!
Mudding
Joined: Jan 2013
Posts: 135
Likes: 0
From: Greensboro, NC
My old unit will be back from the machine shop next week, so I will either have a spare, or one to sell.
hoop
Mudding
Joined: Feb 2012
Posts: 183
Likes: 0
From: Park City, Utah
In the process of doing this myself. Have the Pirelli Scorpions mounted on the 19" RR wheels. Just need to find some nuts (already found the hub-centric rings). British Parts wants $240 for 20 lug nuts. Best price I've found is about $85 for some zinc coated ones from across the pond. Any leads on where to get a set on the cheap?
Pro Wrench
Joined: Dec 2012
Posts: 1,364
Likes: 31
From: Placerville, CA USA
In the process of doing this myself. Have the Pirelli Scorpions mounted on the 19" RR wheels. Just need to find some nuts (already found the hub-centric rings). British Parts wants $240 for 20 lug nuts. Best price I've found is about $85 for some zinc coated ones from across the pond. Any leads on where to get a set on the cheap?
Mudding
Joined: Feb 2012
Posts: 183
Likes: 0
From: Park City, Utah
These are what I found to be the best price for 20.
Range Rover L322 2002 2004 Vogue Set of 20 Alloy Wheel Nuts Finished in Zinc | eBay
Range Rover L322 2002 2004 Vogue Set of 20 Alloy Wheel Nuts Finished in Zinc | eBay
Rock Crawling
Joined: Jan 2011
Posts: 446
Likes: 3
From: Honolulu, Hawaii
You'll love it. It is so beefy, and the piece of mind that you get from having it is outstanding. I know the rear driveshaft doesn't have the bad rep that the front one does, but its still worth the upgrade, especially with what you are doing!
Agreed! It's a substantial piece. When I pulled it out of the box today I just kind of pondered it, it is STOUT! Reminds me of a Unimog torque-tube, I can't wait.
Rock Crawling
Joined: Jan 2011
Posts: 446
Likes: 3
From: Honolulu, Hawaii
Also, I don't know if you are picky like I am, but I made sure that the grease I used was the one GBR used, and its Lucas Red n' Tacky.
Haha nice, right after I got it I emailed Bill to thank him and to ask him what he used. Thanks for the info!
Also, I looked under the truck today and there seems to be a bracket with something on it mounted on the inside of the chassis, looks like it'll block the install of this thick of a shaft. Any idea of what that is?
Also, I looked under the truck today and there seems to be a bracket with something on it mounted on the inside of the chassis, looks like it'll block the install of this thick of a shaft. Any idea of what that is?
Rock Crawling
Joined: Jan 2011
Posts: 446
Likes: 3
From: Honolulu, Hawaii
Haha nice, right after I got it I emailed Bill to thank him and to ask him what he used. Thanks for the info!
Also, I looked under the truck today and there seems to be a bracket with something on it mounted on the inside of the chassis, looks like it'll block the install of this thick of a shaft. Any idea of what that is?
Also, I looked under the truck today and there seems to be a bracket with something on it mounted on the inside of the chassis, looks like it'll block the install of this thick of a shaft. Any idea of what that is?
Also, do you have the balancer on your rear differential? I spent about an hour trying to get that thing back on after I had taken the rear skid off to put in new diff fluid, and it made me really question whether or not I really needed it. Then to top that off my friend has an 04 and it doesn't have a balancer, so I was reasonably confused.
