General Range Rover Discussion - Archived Archived threads for all Range Rover discussions.
Sponsored by:
Sponsored by:

still no brakes

Thread Tools
 
Search this Thread
 
  #11  
Old 06-26-2010 | 10:15 AM
sickvehicle's Avatar
Thread Starter
|
Three Wheeling
Joined: Jun 2010
Posts: 52
Likes: 0
Default

thanks scott thats the best info i got thus far... the washer in the inside is it located in the the area where the shaft is? i already took the modulator out i ordered a used one but like i said the pump was cutting on and what i did was disconnect the small line going from the pump to the modulator not the high side and i could hear a difference every time connect and disconnect the line as if the pump was coming under load when i connected it
it back to the fluid line?
 
  #12  
Old 06-26-2010 | 09:41 PM
LRScott's Avatar
Pro Wrench
Joined: Feb 2008
Posts: 1,706
Likes: 3
From: Meridian, Idaho
Default

It will naturally sound like its under load when connected to the modulator. The main question here is, does the pump ever turn off?
 
  #13  
Old 06-27-2010 | 05:40 AM
sickvehicle's Avatar
Thread Starter
|
Three Wheeling
Joined: Jun 2010
Posts: 52
Likes: 0
Default

pump stays on i had to unplug it
 
  #14  
Old 06-30-2010 | 11:41 PM
varianted's Avatar
1st Gear
Joined: Jun 2010
Posts: 1
Likes: 0
Default

save your money for the repairs when it breaks down.
Muscle Max XL
 
  #15  
Old 07-02-2010 | 11:02 PM
sickvehicle's Avatar
Thread Starter
|
Three Wheeling
Joined: Jun 2010
Posts: 52
Likes: 0
Default fixed it

bad modulator.....go figure thanks to all u guys for the info
 
  #16  
Old 07-03-2010 | 02:13 AM
LRScott's Avatar
Pro Wrench
Joined: Feb 2008
Posts: 1,706
Likes: 3
From: Meridian, Idaho
Default

Most likely due to the bad plastic valve. I can feel my pedal clicking, so it looks like I might be tearing it apart one weekend.
 
  #17  
Old 07-04-2010 | 01:13 PM
sickvehicle's Avatar
Thread Starter
|
Three Wheeling
Joined: Jun 2010
Posts: 52
Likes: 0
Default mod

Originally Posted by LRScott
Most likely due to the bad plastic valve. I can feel my pedal clicking, so it looks like I might be tearing it apart one weekend.
can u make some photos of the brake down i want to rebuild my old one
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
lrsmith62
Discovery II
4
08-24-2012 08:24 AM
FightOnUSC79
Discovery II
10
11-26-2010 09:43 AM
1eyescooter
Discovery II
16
02-01-2007 11:12 AM
Bene
General Tech Help
9
01-29-2007 12:59 AM
1eyescooter
General Tech Help
0
01-15-2007 08:48 PM



Quick Reply: still no brakes



All times are GMT -5. The time now is 07:32 AM.