What did you do with your DII today?
#3622
I put the bumper on today, it went on easy enough. It did however require quite a lot of trimming. My grill actually broke while I was cutting on it, so I ended up removing entirely too much. I'm going to find a new grill and take my time with it. But I dig the look and more so the new approach angle. I would definitely recommend this bumper to anyone.
#3624
I got off of work early today and went to a junk yard with the Disco to get more servicible Disco parts.
I got 2 SAI pumps, 3x window switches panel with heated seats, 3x windscreen nozzles, 1 complete fuse/relay assembly from the engine bay, the plastic curled brake line protectors and clamps, and 2 amber side turn signals. All going on eBay to support my future Land Rover parts purchases. 😎
I learned the the hard way that the air filter cover for the '03 & '04 Disco doesn't fit for an '01 Disco. It's a slightly larger diameter connection going to the MAF air flow connector.
I got 2 SAI pumps, 3x window switches panel with heated seats, 3x windscreen nozzles, 1 complete fuse/relay assembly from the engine bay, the plastic curled brake line protectors and clamps, and 2 amber side turn signals. All going on eBay to support my future Land Rover parts purchases. 😎
I learned the the hard way that the air filter cover for the '03 & '04 Disco doesn't fit for an '01 Disco. It's a slightly larger diameter connection going to the MAF air flow connector.
Last edited by JUKE179r; 01-13-2017 at 04:56 PM.
#3625
I put the bumper on today, it went on easy enough. It did however require quite a lot of trimming. My grill actually broke while I was cutting on it, so I ended up removing entirely too much. I'm going to find a new grill and take my time with it. But I dig the look and more so the new approach angle. I would definitely recommend this bumper to anyone.
#3628
Auxiliary Fan
Replaced a badly frozen aux fan, hopefully that is the only reason the fuse was blowing, took my time. Only took an hour.
And that is with half the mounting bolts breaking from rust. if i had smaller hands the top bolt would not of take 15 minutes to put back in.
Hopefully a simple, inexpensive fix, knock on wood.
Doing a front hub tomorrow or Monday. Planning for the worst.
And that is with half the mounting bolts breaking from rust. if i had smaller hands the top bolt would not of take 15 minutes to put back in.
Hopefully a simple, inexpensive fix, knock on wood.
Doing a front hub tomorrow or Monday. Planning for the worst.
#3629
#3630
Replaced a badly frozen aux fan, hopefully that is the only reason the fuse was blowing, took my time. Only took an hour.
And that is with half the mounting bolts breaking from rust. if i had smaller hands the top bolt would not of take 15 minutes to put back in.
Hopefully a simple, inexpensive fix, knock on wood.
Doing a front hub tomorrow or Monday. Planning for the worst.
And that is with half the mounting bolts breaking from rust. if i had smaller hands the top bolt would not of take 15 minutes to put back in.
Hopefully a simple, inexpensive fix, knock on wood.
Doing a front hub tomorrow or Monday. Planning for the worst.