Land Rover / 2020 Defender Today 06:39 AM
Before you buy any sensors, check the oil pressure/temperature sensor connector at the oil filter housing. Also check the harness where it passes near the engine mount and front cover. Make sure...
Land Rover / 2020 Defender Today 04:24 AM
stevemfr
I forgot - "Build Mode" was replaced "Manufacturing Mode". It's in the CHCM (Chassis Control Module).
I should have written "there might be something coming..." Sorry :D
Land Rover / LR4 Yesterday 09:19 PM
Doing a zip kit? I would.
Land Rover / LR3 Yesterday 08:50 PM
Today I finished my diff rebuild. Hopefully I can get it installed this weekend. I had issues getting the used diff to rebuild to begin with and when the yard did get me one, it had 240k miles versus...
DakotaTravler
Thread Starter
Land Rover / LR3 Yesterday 08:43 PM
Done. Final read was 23 inch pounds assembled which puts me on the high side but under spec range of 25 inch pounds. For new bearings I am okay with that but since pinion are old, I probably am at...
2020 22 Defender
Thread Starter
Land Rover / 2020 Defender Yesterday 07:44 PM
I am pretty sure there is a left and right side specific clip so make sure you have the right one. Also, if I remember correctly the tension from the wind screen kind of helps keep it place.
Land Rover / Discovery II Yesterday 07:23 PM
I quit going to the dealerships once all they had for LR swag was a pen and a golf tee lol. All my friends are running their own independent LR shops now, and if I need something all I really have to...
Land Rover / 2020 Defender Yesterday 06:49 PM
LOL. Thanks GavinC , checked the shop manual and the other component seems to be the IPMA module (image processing) which I also have, so looks like everything is there. There are three explicit AHBA...
Land Rover / Discovery II Yesterday 06:36 PM
BigBrian27
I'm going to look at one Saturday. I'm curious to see how rusty it is.
But yeah generally that's good advice. It might come down to me taking a trip to get one, who knows.
Land Rover / Discovery II Yesterday 05:06 PM
how did you make out with the leak? get it fixed?