Repairing the VSS
#61
Hello gprtech. I'm still having a problem with my D1 with an intermittent repetitive cutting out. I installed a used VSS which didn't solve the problem, but for diligence sake I would like to refurbish the unit. Unfortunately your link is not connecting, could you please repost? Appreciated, many thanks. regards Tony G. NZ
#63
#64
Broken Link to PDF
I've seen quite a bit of chat about unidentified problems and the possibility of the VSS being the cause.
Because the previous owner of my truck sold it because of these types of complaints, I was very interested in the VSS. I bought one on Ebay to rip apart, and when I found how easy it was to work on, and what was wrong with it, I took the one out of my truck, did the same and documented it.
You can get the write up here:
http://www.key-men.com/downloads/Lan...rebulid_v1.pdf
My guess is that at this point, most of these trucks need this rebuild whether or not you've seen the symptoms.
I'll be revising this if I can find a more suitable part, and I'll update the thread if that happens.
Because the previous owner of my truck sold it because of these types of complaints, I was very interested in the VSS. I bought one on Ebay to rip apart, and when I found how easy it was to work on, and what was wrong with it, I took the one out of my truck, did the same and documented it.
You can get the write up here:
http://www.key-men.com/downloads/Lan...rebulid_v1.pdf
My guess is that at this point, most of these trucks need this rebuild whether or not you've seen the symptoms.
I'll be revising this if I can find a more suitable part, and I'll update the thread if that happens.
Thread
Thread Starter
Forum
Replies
Last Post
chelvey@helveyconsulting.com
General Tech Help
4
03-11-2016 01:44 PM
elboy0712
Discovery II
4
02-19-2010 07:09 PM