Installed new headliner. Now I got a new leak on the floor board

 

Today I was out of parts but I found some led lights marked down at Northern Tools for $20 a piece. I used the factory wiring for the fog lights that I deleted when I cut down the bumper. On to the picks..............

 

Moving on while the weather is good

 

That's a clever idea with the backs of the rear seats.

 

Got a sweet migraine this morn so was out most of the day. Managed to get most of the suspension parts clean and degreased on drivers side. My head couldnt take any more of the power washer. So did most by hand w a wire brush. Installed new TF shock and spring.

 

Removed mass amounts of butyl sealer, drilled a thousand spot welds out, stripped and sanded, test fit the D2 stuff.

All drilled out and separated


Lining things up

 

How easy/hard will it be to change the bulbs?

 

Picked up the steel for my trailing arms today.
48" of 2.0"x.25" DOM
21" OF 5"x.25" Flat stock
8" of 3"x3"x.1875" Square tube
Ballistic Fab order will be here Thursday.

 

Relatively easy. D2 lights are removed by four screws on the outside like below.

 

Got someone to bend and weld? What's the square and flat stock for?